Index of Papers by Author
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
| Author(s) | Year/Vol/No | Title |
| A | ||
| Alexander, Y. | 1999/17/IV | Terrorism in the Twenty-First Century: Threats and Responses |
| Alston, S.; Powell, L.; Stroud, P.; Brown, R. C. | 1997/15/II | A Workplace Study of the Use and Maintenance of Respiratory Protective Equipment against Vapour |
| Anderson, A.; Sullivan, F.; Bardsley, S.; Jensen, R. | 2009/26/III-IV | The Effect of Respirator Wear on Blood Lactate During Maximal Exertion |
| Anderson, N. J.; Cassidy, P. E.; Janssen, L. L.; Dengel, D. R. | 2006/23/I-II | Peak Inspiratory Flows of Adults Exercising at Light, Moderate and Heavy Work Loads |
| B | ||
| Bailey, A. E. | 1999/17/I | Effects of Female Facial Dimensions on Full Face Respirator Fit |
| Bancroft, B. | 1999/17/II | Workplace Fit of Full Face Mask Respirators — A New Approach |
| Berndtsson, G. | 1999/17/I | Tomorrow's Standards — Where are we Heading? |
| ——— | 2004/21/I-II | Peak Inhalation Air Flow and Minute Volumes Measured in a Bicycle Ergometer Test |
| ——— & Ekman, L. | 2003/20/III-IV | A New Simplified Technique for Measuring Inspiratory Flow Characteristics |
| Bekdash, O., Chapain, P., Johnson, A. T. | 2013/30/1 | Developing an Air Sampling System for Detecting Oxygen Leaks from the Facepiece of a Self-Contained Breathing Apparatus |
| Bergman, M. S.; Viscusi, D. J.; Palmiero, A. J.; Powell, J. B.; Shaffer, R. E. | 2011/28/I | Impact of Three Cycles of Decontamination Treatments on Filtering Facepiece Respirator Fit |
| ——— ; Basu, R.; Lei, Z.; Niezgoda, G.; Zhuang, Z. | 2017/34/1 |
Development of a Manikin-Based Performance Evaluation Method for Loose-Fitting Powered Air-Purifying Respirators |
| ——— ; Zhuang, Z.; Brochu, E.; Palmiero, A. | 2015/32/2 | Fit Assessment of N95 Filtering-Facepiece Respirators in the U.S. Centers for Disease Control and Prevention Strategic National Stockpile |
| Bidwell, J. O.& Janssen, L. L. | 2004/21/III-IV | Workplace Performance of an N95 Respirator in a Concrete Block Manufacturing Plant |
| Bien, C. | 1999/17/II | The Lawrence Livermore Test |
| ——— | 1998/16/I-IV |
Minimum Passing Fit Factor |
| ——— | 2008/25/I-II | The Development of Respirator Protection Factors in the United States |
| Brey, L. & Janssen, L. | 2007/24/III-IV | Letter to editor — ref. Haupt & Paszkiewicz (JISRP 2006 III-IV) |
| Brokaw, E.; Johnson, A.; McCuen, R. | 2011/28/I | Improved Prediction of Minute Volume Flow Rates |
| Brousseau, L. M. | 2009/26/III-IV | Toward Better Fitting Respirators: Summary from a Workshop and Research Roadmap |
| Brown, R. C.; Bagley, M. J.; Wake, D.; Thompson, J.; Pengelly, M. I.; Wright, M. D.; Plant, N. T.; Broughton, R. A. | 1997/15/II | Spatial Deposition Pattern of Adsorbed Material in Activated Carbon Respirator Filters |
| Buchner, M.; Buchner, B. | 2002/19/I-II | A Study of Speech Intelligibility of Four Protective NFPA-Approved SCBA Facepieces Masks Equipped with Audio Mask Amplifiers |
| Butler, K. M. | 2008/25/I-II | A Computational Model of an Outward Leak from a Closed-Circuit Breathing Device |
| C | ||
| Caddell, M.; Doney, B.; Bang, K. M.; Petsonk, E. L. | 2007/24/III-IV | Respiratory Protection in U.S. Industry – an Evaluation of Program Quality Indicators and Occupational Health Outcomes |
| Calder, S. | 2002/19/III-IV | The Introduction of Quantitative Fit-Testing at the UKAEA Dounreay Site |
| Campbell, D.; Doney, B.; Groce, D.; Greskevitch, M.; Syamlal, G.; Coffey, C. C.; Bang, K. M. | 2005/22/I-II | Respiratory Fit Testing Practices in the U.S. |
| Caretti, D. M. | 1999/17/I | Effect of respirator Inspiratory Resistances on Respiratory Muscle Performance Following Long-term Exercise |
| ——— | 1996/14/IV | Effects of Full Face-Piece Respirator Design on Detection of Peripherally Located Stimuli |
| ——— | 2003/20/I-II | Influence of Respirator Design on Subjective Comfort |
| ——— | 2009/26/I-II | Comparison of Unmanned and Manned Test Measurements of Carbon Dioxide in the Breathing Zone of an Escape Air-Purifying Respirator |
| ——— | 2009/26/I-II | Impacts of Respirator, Suit, and Helmet Wear on Head and Upper Body Range of Motion |
| ——— & Barker, D. J. | 2004/21/I-II | Impact of Combined Respirator, Hood, and Helmet Wear on User Comfort |
| ——— & Coyne, K. M. | 2006/23/I-II | A Quantitative Review of Ventilation Rates during Respirator Resistance Breathing |
| ——— & Gardner, P. D. | 2003/20/III-IV | Quantifying the Heat Stress Attributable to Respirator Wear |
| ———; Barker, D. J.; Coyne, K. M. | 2013/30/2 | Simulated Workplace Protection Evaluation of a Dual Cavity Respirator Concept |
| ——— ; Coyne, K. M.; Barker, D. J. | 2012/29/2 | Effects of Respirator Inhalation Resistance on Low-to- Moderate Intensity Task Performance |
| Chapain, P.; Bekdash, O.; Johnson, A. T. | 2013/30/2 | Flow Based Oxygen Leak Detection System in Self-Contained Breathing Apparatus |
| Chazelet, S.; Silvente, E.; Eypert-Blaison, C.; Belut, E. | 2016/33/2 | Asbestos Fibre Sampling through a Facepiece Visor to Measure Workplace Protection Factor |
| Chia, S.E.; Koh, D.; Takahashi, K.; Li, Y.; Imai, T.; Li, W.; Fones, C.; Ng, V.; Lim, M. K. | 2006/23/III-IV | Appropriate use of personal protective equipment among health care workers in Singapore, China, and Japan hospitals during the SARS outbreak |
| Cheberyachko, S.; Frundin, V.; Cheberyachko, Y.; Stolbchenko, O. | 2017/34/1 |
Studying the Influence of a Filter Box Design on Respirator Resistance to Breathing |
| Chinn, M. J.; Hindmarsh, C. J.; Pears, L. A. | 2002/19/III-IV | Carbon Fibres for Combined Particulate and Vapour Filtration |
| Clayton, M. P.; Rajan-Sithamparanadarajah, B.; Vaughan, N. P. | 2012/29/1 | Performance Studies on Respiratory Protective Devices in the Workplace – Part I: Variation in Measures of Performance |
| ——— | 2013/30/1 | Performance Studies on Respiratory Protective Devices in the Workplace – Part II: Towards a unified approach |
| Cloonan, T. K. | 2001/18/II-IV | Law Enforcement Responders (LER): are they Protected in a Chemical, Toxic Industrial, Biological, Radiological and/or Nuclear (CTBRN) Weapon of Mass Destruction (WMD) Terrorism Incident? |
| Coffey, C. C.; Zhuang, Z.; Lawrence, R. B.; Jenson, P. A. | 2002/19/I-II | Comparison of Six Quantitative Fit Test Methods Using Full Facepiece Respirators with a Measurement of Exposure |
| ——— ; Zhuang, Z.; Campbell, D. L. | 1998/16/I-IV | Evaluation of the Bitrix(TM) Qualitative Fit Test Method Using N95 Filtering Facepiece Respirators |
| ——— ; Zhuang, Z.; Campbell, D. L.; Nyers, W. R. | 1998/16/I-IV | Quatitative Fit Testing of N95 Respirators: Part II — Results, Effect of Filter Penetration, Fit-test, and Pass/Fail Criteria on Respirator |
| Colton, C.E. | 2015/32/2 | American National Standard Practices for Respiratory Protection (ANSI/ASSE Z88.2-2015) |
| Coulliette, A.D.; Perry, K. A.; Fisher, E. M.; Edwards, J. R.; Shaffer, R. E.; Noble-Wang, J. | 2015/32/1 | MS2 Coliphage as a Surrogate for 2009 Pandemic Influenza A (H1N1) Virus (pH1N1) in Surface Survival Studies on N95 Filtering Facepiece Respirators |
| Coyne & Barker | 2015/32/2 | Respirator Speech Intelligibility Testing with an Experienced Speaker |
| D | ||
| Dalamagas, D.; Coffey, C. C.; Zhuang, Z.; Lawrence, R. B. | 2002/19/I-II | Exposure Profile Effects on the Concentration of Freon-113 in Exhaled Air |
| Ding, F. & LeVan, M. D. | 2010/27/2 | Virtual Group Theory - A New Method to Calculate the Adsorption Equilibrium of Organic Mixtures for Respirator Protection Applica |
| Ding, S-T.; Yao, H.; Yang, X-B. | 2010/27/2 | Respirator National Standard Development in China - A Perspective of Past Decade |
| Doney, B.; Greskevich, M.; Middendorf, P.; Groce, D. | 2003/20/III-IV | Which Substances Prompt Respirator Use? |
| ——— ; Hoffman, W.; Groce, D.; Greskevitch, M. | 2004/21/I-II | Usefulness of Respirator Manufacturer User’s Instructions and NIOSH Approval Labels |
| E | ||
| F | ||
| Fisher, E. M.; Williams, J.; Shaffer, R. E. | 2010/27/1 | The Effect of Soil Accumulation on Multiple Decontamination Processing of N95 Filtering Facepiece Respirator Coupons Using Physical Methods |
| Forster, J. A. | 1997/15/III-IV | Selection and Use of Self Rescuers in Conjunction with Safe Havens in British Mines |
| Frost, S.; Mogridge, R. | 2007/24/I-II | Performance of an Airfed Loose-fitting Helmet and Visor Respiratory Protective Device Worn during a Simulated Printing Works Activity |
| Frost, S.; Mogridge, R.; Roff, M. | 2014/31/1 | Fit of Filtering Facepiece Class 3 (FFP3) Respirators Part 1: A Comparison of Fit Test Methods |
| Frost, S.; Mogridge, R | 2014/31/2 | Fit of Filtering Facepiece Class 3 (FFP3) Respirators Part 2: The Value of Fit-Checking and Simple Subjective Assessments of Fit as an Alternative to a Fit Test |
| ——— | 2014/31/2 | Fit of Filtering Facepiece Class 3 (FFP3) Respirators Part 3: Suitability of FFP3 for Real Faces |
| G | ||
| Gardner, P. D. | 2003/20/I-II | The Effect of Moisture on the Face Seal Fit of Half-Mask Respirators |
| Garrod, A. N. I.; Rajan-Sithamparanadarajah, R.; Vaughan, N. | 2004/21/III-IV | An Innovative Approach to Respiratory Hazard Control |
| Gibson, S. D. | 2004/21/I-II | Respiratory Protective Equipment and the Management of Risk: Where Safety and Security Diverge |
| van der Gijp, S.; Steenweg, L. | 2004/21/III-IV | Respirator Performance during Military Field Trials |
| Dennis Groce, D.; Guffey, S.; Viscusi, D. J.; Lynch, S.; Benson, S.; Zhuang, Z. | 2010/27/1 | Three-Dimensional Facial Parameters and Principal Component Scores: Association with Respirator Fit |
| Groves, W. A. | 2006/23/I-II | Personal Sampling System for Measuring Workplace Protection Factors for Gases and Vapors |
| H | ||
| Han, H-S (R); Holm, R. L.; Prell, M. E.; Remiarz, R. J. | 2012/29/2 | Penetration of N95 Filtering-facepiece Respirators by Charged and Charge-Neutralized Nanoparticles |
| Harrison, B. H.; Liang, S. H. | 2005/22/I-II | Quantitative Fit Testing of Military Gas Masks with the TSI Portacount: Part II – Quantifying the Limitations and Recommendations for Use |
| ——— ; Harrison, C.; Liang, S.; Smith, S.; Croll, L. | 2007/24/I-II | Laboratory Performance Testing of Powered Air Purifying Respirators |
| Haruta, H.; Honda, T.; Eninger, R. M.; Reponen, T.; McKay, R.; Grinshpun, S. A. | 2008/25/III-IV | Experimental and Theoretical Investigation of the Performance of N95 Respirator Filters against Ultrafine Aerosol Particles Tested at Constant and Cyclic Flows |
| ——— ; Yuasa, H.; Shimizu, E.; Kimura, K. | 2016/33/2 | Breathing Recording Aimed to Provide Appropriate Test Flow Rate on Performance Evaluation of Respirators for Elementary School Children |
| Haupt, N.; Paszkiewicz, P. | 2006/23/III-IV | Breakthrough Measurements for Small-Capacity Cartridges at Elevated Flow Rates in Different Flow ModesSee also: Brey & Janssen (JISRP 2007 III-IV) |
| He, X.; Grinshpun, S. A.; McKay, R. T.; Yermakov, M.; Reponen, T.; Lu, J.; Soroushian, P. | 2013/30/2 | Performance Characteristics of an Elastomeric Half-mask Respirator Modified with a Polymer Micro-Patterned Adhesive |
| Hines, S. E.; Mueller, N.; Oliver, M.; Gucer, P.; McDiarmid, M. | pdf 2017/34/2 (4.84 MB) | Qualitative Analysis of Origins and Evolution of an Elastomeric Respirator-based Hospital Respiratory Protection Program |
| Hori, H.; Ishidao, T.; Ishimatsu, S. | 2003/20/I-II | Thermal Regeneration Method for a Respirator Cartridge for Organic Vapors |
| I | ||
| J | ||
| Janssen, L. L. | 2004/21/III-IV | Efficiency and Pressure Drop Effects of High Concentrations of Cement Dust on N95 Electret Filters |
| ——— | 2003/20/III-IV | Efficiency of Degraded Electret Filters: Part II – Field Testing Against Workplace Aerosols |
| ——— | 2009/26/I-II | Industrial Hygiene Principles and the Use of Assigned Protection Factors |
| ——— ; Anderson, N. J.; Cassidy, P. E.; Weber, R. A.; Nelson, T. J. | 2005/22/III-IV | Interpretation of Inhalation Airflow Measurements for Respirator Design and Testing |
| ——— & Bidwell, J. O. | 2006/23/I-II | Performance of Four Class 95 Electret Filters Against Diesel Particulate Matter |
| ——— ; Bidwell J. O.; Mullins, H. E.; Nelson, T. J. | 2003/20/III-IV | Efficiency of Degraded Electret Filters: Part I – Laboratory Testing Against NaCl and DOP before and after Exposure to Workplace Aerosols |
| ——— ; Bidwell, J.; McCulloch, N. | 2007/24/I-II | Performance of an N95 Filtering Facepiece Respirator in a Grinding Operation |
| Janvier, F.; Haddad, S.; Lara, J. | 2017/34/1 |
Integrating a Toxicological Approach for Breakthrough Curves of Organic Vapor Mixtures in the Estimation of Respirator Cartridge Service Life |
| Jasper, W.; Hinestroza, J.; Mohan, A.; Thompson, D.; Baker, R. | 2005/22/III-IV | Effect of Phase of Toluene on Filtration Performance of Electret Filter Media against Di-Octyl-Phthalate Aerosols |
| Jeffs, C. A., Smith, M. W., Stone, C. A., Crittenden, B. D., Perera, S. P. | 2013/30/1 | Low pressure drop respirator gas filters using adsorbent hollow fibres as an alternative to granular adsorbents |
| Joe, P. S.; Floyd, E. L.; Lungu, C. T. | 2012/29/2 | Physical Fabrication and Verification of New NIOSH Digital Headform Designs with Skin-analog for Use in Fit Testing |
| Johnson, A. T. | 1999/17/I | Comparison of Treadmill Exercise Performance Times for Several Types of Respirators |
| ——— | 2006/23/III-IV | Why Peak Flow Matters |
| ——— ; Dooly, C. R.; Coyne, K. M.; Sahota, M. S.; Benjamin, M. B. | 1997/15/I | Work Performance when Breathing through very high Exhalation Resistance |
| ——— ; Koh, F. C.; Scott Jr., W. H.; Mackey, K. M.; Chen, K. Y. S.; Rehak, T. | 2005/22/III-IV | Inhalation Flow Rates during Strenuous Exercise |
| ——— ; Phelps, S. J.; Scott Jr., W. H.; Koh, F. C. | 2005/22/III-IV | Using Self-Contained Self-Rescuers at High Work Rates |
| ——— ; Scott, W. H.; Caretti, D. M. | 2001/18/I | Review of Recent Research on Respiration while Wearing a Respirator |
| ——— ; Scott, W. H.; Caretti, D. M. | 2001/18/I | Review of Recent Research on Communications while Wearing a Respirator |
| ——— ; Scott, W. H.; Caretti, D. M. | 2003/20/I-II | Do Respirators Stress the Cardiovascular System? |
| ——— ; Scott, W. H.; Koh, F. C.; Francis, E. B.; Lopresti, E. R.; Phelps, S. J. | 2006/23/III-IV | Effects of PAPR Helmet Weight on Voluntary Performance Time at 80-85% of Maximal Aerobic Capacity |
| ———; Scott, W. H.; Phelps, S. J.; Caretti, D. M.; Koh, F. C. | 2005/22/I-II | How Is Respirator Comfort Affected by Respiratory Resistance? |
| Jung, H.; Lee, S.; Lee, J.; Kim, J.; Tsai, P.; Yoon, C. | 2014/31/2 | Total Inward Leakage (TIL) Testing of Anti-yellow Sand and Quarantine Masks Using NaCl Aerosol |
| K | ||
| Kapoor, V. | 2014/31/1 | Extending the Perception of Speech Intelligibility in Respiratory Protection |
| Kim, K.; Kim, H. | 2006/23/III-IV | Three-Dimensional Shape Analysis of Commercial Half-Facepiece Respirators for Koreans: Structural Approach |
| Kim, K.; Kim, H.; Lee, J.; Lee, E.; Kim, D. | 2004/21/III-IV | Development of a New 3D Test Panel for Half-Mask Respirators by 3D Shape Analysis for Korean Faces |
| Kim, J-H.; Roberge R. J.; Shaffer, R. E.; Zhuang, Z.; Powell, J. B.; Bergman, M.; Palmiero, A. J. | 2017/34/1 | Project BREATHE – Prototype Respirator Evaluation Utilizing Newly Proposed Respirator Test Criteria |
| Kimura, K. | 1998/16/I-IV | Decline in Protection Efficiency in the Use of Dust Respirators |
| King, W. P.; Sietsema, M.; McClain, C.; Xu, S.; Dhrimaj, H. | pdf 2017/34/2 (4.84 MB) | Work of Breathing for Respiratory Protective Devices: Method Implementation, Intra-,Inter-Laboratory Variability and Repeatability |
| Kiryazi, N. | 2011/28/I | Performance Comparison of Breathing and Metabolic Simulators |
| ———; Shubilla, J. P. | 2001/18/I | Self-Contained Self-Rescuer Field Evaluation: Sixth-Phase Results |
| Koehler, R. H.; He, X. (K.); Grinshpun, S. A. | 2014/31/2 | A Novel Face Seal Design for Filtering Facepiece Respirators: Development and Pilot Testing In a Hospital Operating Room |
| Koh, F. C.; Johnson, A. | 2012/29/I | Flow Patterns in Loose-Fitting PAPRs Help Explain Low Protection Factors |
| L | ||
| Lavanchy, A.; Liebi, R.; Hugi-Cleary, D.; Stoeckli, F. | 2005/22/III-IV | Prediction of Filter Performances against Organic Vapours: Statistical Analysis of Breakthrough Times as a Basis for a Simple Prediction Model |
| Lawrence, R. B.; Campbell, D. L.; Myers, W. R.; Calvert, C. A.; Jensen, P. A.; Coffey, C. C. | 2003/20/I-II | Determining the Efficacy of Fit-Test Protocols Using N95 Filtering-Facepiece Respirators — Alternative Approaches |
| Lei, Z.; Yang, J. | 2013/30/2 | Computational Fluid Dynamics-Based Respirator Fit Evaluation - A Pilot Study |
| Liang, S. H.; Harrison, B. H. | 2005/22/I-II | Quantitative Fit Testing of Military Gas Masks with the TSI Portacount: Part I – Identifying the Limitations |
| Lisowski, A. | 1999/17/II | Performance of Glass Fiber Filter Material Measured with Monodisperse and Standard Aerosols |
| M | ||
| Mackey, K. R. M.; Johnson, A. T.; Scott, W. H.; Koh, F. C. | 2005/22/I-II | Over Breathing a Loose-Fitting PAPR |
| McKay, R. T.; Bradley, J. | 2005/22/III-IV | Evaluation of Three New Fit Test Protocols for Use with the TSI PortaCount |
| Metzler, R. W. | 2002/19/I-II | Improving Respiratory Protection through International Partnerships by Increasing Knowledge, Enhancing Education and Developing Technologies |
| ——— ; Spelce, D.; Johnson, J.S.; Rehak, T.R | 2016/33/1 | Effective Respiratory Protection Achieved through Partnership, Legislation, Regulation and, American National Consensus Respirator Standards – An underpinning of ANSI/ASSE Z88.2–2015 Practices for Respiratory Protection |
| Miller, T.; Krasner, E.; Alon, U. | 2005/22/I-II | Civilian Protective System – CAPS2000 |
| Monaghan, W. D., Roberge, M. R., Rengasamy, M., Roberge, R. J. | 2009/26/I-II | Thermal Imaging Comparison of Maximum Surface Temperatures Achieved on N95 Filtering Facepiece Respirators with and without Exhalation Valves at Sedentary Breathing Volumes |
| Mostofi, R.; Bahloul, A.; Lara, J.; Wang, B.; Cloutier, Y.; Haghighat, F. | 2011/28/I | Investigation of Potential Affecting Factors on Performance of N95 Respirator |
| N | ||
| Neesham-Grenon, E., Lavoie, J., Cloutier, Y., Marchand, G., Debia, M. | 2013/30/1 | BioProtect Tool: a Control Banding Method for Respirator Selection against Bioaerosols |
| Nelson, G. O.; Strong, M.; Hoag, S. | 2007/24/I-II | Respirator Cartridge Breakthrough Testing of Substituted Silanes and Siloxanes |
| Nelson, T. J.; Janssen, L. L.; Luinenburg, M. D.; Mullins, H. E. | 2003/20/III-IV | Development of an Abbreviated Qualitative Fit Test Using Bitter Aerosol |
| ——— & Mullins, H. E. | 2004/21/I-II | Recommendations for the Acceptance Criteria for New Fit Test Methods |
| Nicas, M. | 2005/22/I-II | Use of a Probalistic Infectious Dose Model for Estimating Airborne Pathogen Infection Risk: Application to Respiratory Protection |
| Niezgoda, G., Benson, S. M., Eimer, B. C., Roberge, R. J. | 2013/30/1 | Forces Generated by N95 Filtering Facepiece Respirator Straps |
| Nuckols, M. I.; Rudolph, J.; Hughes, R. J. | 1997/15/I | Thermal Analysis of a Firefighter's Breathing Gas Cooler |
| O | ||
| Oestenstad, R. K.; Maples, E. H.; Beasley, T. M. | 2008/25/III-IV | Inclusion of African-American Male Respirator Wearers in the NIOSH Bivariate Fit Test Panel and the Los Alamos National Laboratory Full-Facepiece and Half-Mask Panels |
| —— & Lynch, S. M. | 2008/25/III-IV | Exhalation Valve Leakage Measured by a Negative Pressure Fit Test Method and its Effect on the Measurement of Human Subject Fit Factors |
| P | ||
| Pelfrey, S. H.; Mathers, G.; Richardson, G. S. | 2010/27/2 | The Development and Assessment of a Dual Cavity Respirator |
| Peters, R. H.; Vaught, C.; Hall, E. E.; Volkwein, J. C. | 2007/24/III-IV | Miners’ Views about Personal Dust Monitors |
| Peterson, J. A.; Merinar, T. R. | 1997/15/III-IV | Respirator Maintenance Program Recommendations for the Fire Service |
| Q | ||
| R | ||
| Rengasamy, S.; Verbofsky, R.; King, W.P.; Shaffer, R. E. | 2007/24/I-II | Nanoparticle Penetration through NIOSH-approved N95 Filtering-facepiece Respirators |
| ———, Eimer, B. C.; Shaffer, R. E. | 2008/25/I-II | Nanoparticle Filtration Performance of Commercially Available Dust Masks |
| ———, Miller, A., Eimer, B. C., Shaffer, R. E. | 2009/26/I-II | Filtration Performance of FDA-Cleared Surgical Masks |
| Richardson, A. W.; Hofacre, K. C.; Weed, J.; Holm, R.; Remiarz, R. | 2013/30/2 | Evaluation of a Faster Fit Testing Method for Full- Facepiece Respirators Based on the TSI PortaCount® |
| ———; Hofacre, K. C.; Weed, J.; Holm, R.; Remiarz, R. | 2014/31/1 | Evaluation of a Faster Fit Testing Method for Elastomeric Half-Mask Respirators Based on the TSI PortaCount® |
| ———; Hofacre, K. C.; Weed, J.; Holm, R.; Remiarz, R. | 2014/31/1 | Evaluation of a Faster Fit Testing Method for Filtering Facepiece Respirators Based on the TSI PortaCount® |
| Roberge, R. J.; Zhuang, Z.; Stein, L. M. | 2006/23/I-II | Association of Body Mass Index with Facial Dimensions for Defining Respirator Fit Test Panels |
| Rottach, D. R.; Lei, Z. | pdf 2017/34/2 (4.84 MB) | Stockpiled N95 Filtering Facepiece Respirator Polyisoprene Strap Performance |
| Rusch, O. W.; Reponen, T.; Ronk, C. J.; McKay, R. T. | 2008/25/III-IV | Evaluation of User's Ability to Seal Respirator Cartridge Inlet Openings of Different Sizes and Shapes |
| S | ||
| Sandbacka, S. | 2001/18/II-IV | The Evolution of a Filter Family |
| Scanlan, S.; Roberts, W.; Gray, B. | 2003/20/I-II | Measurement of Operational Fit Factors for Soldiers Wearing the S10 Respirator |
| Seo, H.; Song, Y.; Kim, C.; Kim, H. | 2014/31/1 | Recommended Requirements, Test Methods, and Pass/Fail Criteria for a “B95” Respirator for Healthcare Workers |
| ——— | 2016/33/1 | Characteristics of Korean Children’s Facial Anthropometry Evaluated by Three-dimensional Imaging |
| Shaffer, R. E.; Zhuang, Z.; Bergman, M. S.; Roberge, R. J.; Kim, J-H | 2014/31/1 | Recommended Requirements, Test Methods, and Pass/Fail Criteria for a “B95” Respirator for Healthcare Workers |
| Sietsema, S.; Bodurtha, P.; Dickson, E.; Brosseau, L. M. | 2015/32/1 | Evaluating Simulated Workplace Protection Factors for a First Responder Low-Level Protective Ensemble |
| Sinkule, E.J.; Powell, J.B.; Rubinstein, E.N.; McWilliams, L.; Quinn, T.; Pugliese, M. | 2016/33/2 | Physiologic Effects from Using Tight- and Loose-Fitting Powered Air-Purifying Respirators on Inhaled Gases, Peak Pressures, and Inhalation Temperatures During Rest and Exercise |
| ——— ; Turner, N.; Eschenbacher, W. | 2002/19/I-II | Metabolic and Respiratory Responses during the Performance of a One-hour Man Test 4 |
| Specter, H. | 2007/24/III-IV | Public Use of Respiratory Protection from Nuclear Power Plant Accidents and Terrorist Attacks |
| Spelce, D.; McKay, R.T.; Johnson, J.S.; Rehak, T.R.; Metzler, R.W. | 2016/33/2 | Respiratory Protection for Oxygen Deficient Atmospheres |
| Spelce, D.; Rehak, T. R.; Metzler, R.; Johnson, J. S. | pdf 2017/34/2 (953 KB) | Pre-World War I Firefighter Respirators and the U.S. Bureau of Mines Involvement in WWI |
| Symons, D. | 2012/29/2 | Use of Speech Transmission Index (STI) for Voice Intelligibility Testing of Respiratory Protection Devices and Proposed Measurement Method |
| T | ||
| Takahashi, M.; Mano, Y.; Shibayama, M.; Yamami, N. | 1999/17/IV | Acceptability of Elevated Breathing Gas Temperature and Humidity in Relation to Ventilation Rate |
| ——— ; Mano, Y.; Shibayama, M.; Yamami, N. | 1999/17/IV | Effects of Elevated Inhaled Oxygen and Carbon Dioxide Concentrations on Respiration and Metabolism during Moderate Exercise |
| Timofeeva, N. T. | 1997/15/III-IV | PPE Certification in Russia |
| Traugot, T. M., Honig, H., Frishman, G., Hizkia, K., Lavie, Y., Priel, Y., Fichman, R., Roter, H., Shuali, U., Nir, I., Krasner, E. | 2009/26/I-II | Children & Infants Respiratory Protective System - CHIRPS |
| Tuinman, I. L.; Albers, T. J.; Geers, L. F. G. | 2007/24/I-II | The Effect of Sampling Probes on Measured Protection Factors in Military Gas Masks |
| U | ||
| V | ||
| Vaught, C.; Mallett, L.; Brnich Jr., M.; Peters, R. | 2004/21/I-II | Expectation vs. Experience: Training Lessons Based upon Miners’ Difficulties when Using Emergency Breathing Apparatus |
| Viscusi, D. J.; King, W. P.; Shaffer, R. E. | 2007/24/III-IV | Effect of Decontamination on the Filtration Efficiency of Two Filtering Facepiece Respirator Models |
| Vo, E.; Shaffer, R | 2012/29/I | Development and Characterization of a New Test System to Challenge Personal Protective Equipment with Virus-Containing Particles |
| Vojtko, M. R.; Roberge, M. R.; Vojtko, R. J.; Roberge, R. J.; Landsittel, D. P. | 2008/25/I-II | Effect on Breathing Resistance of a Surgical Mask Worn over a N95 Filtering Facepiece Respirator |
| W | ||
| Wallaart, J. | 2002/19/I-II | Respiratory Protection: Prescription without Diagnosis |
| Wang, A.; Richardson, A. W.; Hofacre, K. C. | 2012/29/I | The Effect of Flow Pattern on Collection Efficiency of Respirator Filters |
| Weed, J. | 1996/14/IV | Training is the Key to a Good Respirator Fit Test Program |
| Williams, W. J. | 2010/27/1 | Physiological response to alterations in [O2] and [CO2]: relevance to respiratory protective devices |
| Wood, G. O. | 2009/26/III-IV | D-R Plots and Typical Parameters for Several OV and Multigas Cartridges and Canisters |
| ——— | 2015/32/1 | Correlating and Extrapolating Air-Purifying Respirator Cartridge Breakthrough Times – A Review |
| ——— | 2017/34/1 | Testing Air-Purifying Chemical Respirator Cartridges: A Review of Options |
| ——— & Lodewyckx, P. | 2002/19/I-II | Correlations for High Humidity Corrections of Rate Coefficients for Adsorption of Organic Vapors and Gases on Activated Carbons in Air-Purifying Respirator Cartridges |
| Woolery, D. O.; Lee, N. E.; Law, G.; Jolley, D. M.; Beier, D. L.; Giessing, M. L.; Peterson, J. | 2008/25/I-II | Parametric Sensitivity of the C2A1 Filter and Data Comparison with Four Filter Models |
| Wu, B.; Leppänen, M.; Yermakov, M.; Grinshpun, S. | pdf 2017/34/2 (4.84 MB) | Evaluation of a New Instrument for Aerosol Quantitative Fit Testing |
| X | ||
| Y | ||
| Yarbrough, M.I.; Ficken, M.E.; Lehmann, C.U.; Talbot, T.R.; Swift, M.D.; McGown, P.W.; Wheaton, R.F.; Bruer, M.; Little, S.W.; Oke, C.A. | 2016/33/1 | Respirator Use in a Hospital Setting: Establishing Surveillance Metrics |
| Yuasa, H.; Shimizu, E.; Kimura, K.; Emi, H.; Nozaki, K. | 2008/25/III-IV | Performance of Breath-Synchronized Powered Air-Purifying Respirator under Simulated Usage Conditions |
| Z | ||
| Zhuang, Z.; Guan, J.; Hsiao, H.; Bradtmiller, B. | 2004/21/III-IV | Evaluating the Representativeness of the LANL Respirator Fit Test Panels for the Current U.S. Civilian Workers |
| ——— ; Coffey, C. C.; Campbell, D. L.; Myers, W. R. | 1998/16/I-IV | Comparison of Two Newly Developed Methods for Fit Testing N95 Respirators |
| ——— ; Coffey, C. C.; Lawrence, R. B. | 2004/21/I-II | The Effect of Ambient Aerosol Concentration and Exercise on PortaCount® Quantitative Fit Factors |
| ——— ; Coffey, C. C.; Myers, W. R.; Yang, J.; Campbell, D. L. | 1998/16/I-IV | Quantitative Fit-testing of N95 Respirators: Part I — Method Development |